Base Command Manager installation, configuration, and HA verification — Control Plane Installation and Configuration (NVIDIA-Certified Professional: AI Infrastructure)

Base Command Manager Installation, Configuration, and HA Verification

The Base Command Manager is a critical component in the NVIDIA AI Infrastructure, serving as the central management interface for deploying and configuring AI workloads. This section will focus on the installation, configuration, and high availability (HA) verification of the Base Command Manager, which is essential for ensuring a robust AI infrastructure.

Installation of Base Command Manager

To begin the installation of the Base Command Manager, follow these steps:

1. Prerequisites: Ensure that your system meets the hardware and software requirements specified in the NVIDIA documentation.
2. Download: Obtain the latest version of the Base Command Manager from the NVIDIA website.
3. Installation Command: Execute the installation command in the terminal:

Example Command:

sudo apt-get install nvidia-command-manager

Configuration of Base Command Manager

After installation, the next step is to configure the Base Command Manager:

1. Configuration File: Edit the configuration file located at /etc/nvidia/command-manager.conf to set your desired parameters such as network settings and resource allocation.
2. Start the Service: Use the following command to start the Base Command Manager service:

Example Command:

sudo systemctl start nvidia-command-manager

High Availability (HA) Verification

To ensure that the Base Command Manager is running in a high availability mode, perform the following checks:

1. Service Status: Verify that the service is active and running:

Example Command:

sudo systemctl status nvidia-command-manager

1. HA Configuration: Check the HA configuration settings in the configuration file to confirm that failover mechanisms are properly set up.

By following these steps, you will successfully install, configure, and verify the high availability of the Base Command Manager, laying a solid foundation for your NVIDIA AI Infrastructure.

More in this topic

NVIDIA container toolkit installation and GPU use with Docker — Control Plane Installation and Configuration (NVIDIA-Certified Professional: AI Infrastructure)NGC CLI installation — Control Plane Installation and Configuration (NVIDIA-Certified Professional: AI Infrastructure)Control Plane Installation and Configuration — NVIDIA-Certified Professional: AI InfrastructureGPU and DOCA driver installation — Control Plane Installation and Configuration (NVIDIA-Certified Professional: AI Infrastructure)Cluster installation with Slurm, Enroot, and Pyxis — Control Plane Installation and Configuration (NVIDIA-Certified Professional: AI Infrastructure)